Water Temperature Setting; Use - Seco PACKS EASYSHRINK 20 Operating Instructions Manual

5.6 Water temperature setting

To visualise the preset
temperature, press the SET
button.
The temperature varies between « preset temperature » and « preset temperature + 2° C ».

5.7 Use

When the power is turned on, the water cooler displays « -88 » during 3 seconds, then
displays the temperature of the water.
The water temperature is preset in our plant at +20°C. It is adjustable from 10°C to
25°C.
In case of noticeable condensation, it is recommended to set the water
temperature a step higher.
To modify the preset temperature, press simultaneously SET et « up
arrow » or « down arrow ». As soon as the SET button is released, the
water temperature is displayed.
Install the corresponding contact bush for cooling bells (Ø and holder type
depending) onto the top of the holder, and slip over the cooling bell.
33