Table of Contents
Advertisement
Select the suitable stop rod.
Example for a Seco Shrinkfit holder type 5603
We have determined in § 7.1 that the jauge length of the toolholder is A = 85 mm and the shrinking depth is D
= 40 mm.
B = A – D = 85 – 40 = 45 mm
In this case, the suitable stop rod is the one in front of the value 0-60.
7.3 Stop rod adjustment
Fit the stop rod into the spindle of the support module shrinking station.
The stop rod is clipped in position.
Adjust the requested length with the setting wheel and with help of a depth
comparator or depth ruler for depth measuring.
Note: see also § 8.9 & 8.10 (tool length setting by using tool supporting sleeve
for stop rod).
40
Advertisement
Table of Contents
