Descriptions; Pack Easyshrink ® 20; Pack Easyshrink - Seco PACKS EASYSHRINK 20 Operating Instructions Manual

1.1 PACKS EASYSRINK® 20 DESCRIPTION

1.1.1 Pack Easyshrink

1.1.2 Pack Easyshrink
®
20 N°1, ZFM07IN10
A complete set with induction heating, 1 operating station with shrink
depth setting and 2 cooling stations.
Operating station hold the finned supports with toolholder during the heating
cycles.
Cooling process by ventilator streamed air.
Shrink grip and shrink release capacity Ø 3 to 32 mm for carbide, heavy
metal, steel and HSS tool shanks.
Automatic or programming heating modes for shrink grip and shrink release
heating cycles.
Control drives the other modules.
®
20 N°2, ZFM07IN20
A complete set with induction heating, rotary plate of 3 operating + shrink
depth setting + cooling stations.
Operating stations hold the finned supports with toolholder during the heating
and cooling cycles.
All three stations are operating, shrink depth setting and cooling stations :
while one station is used to shrink-grip or shrink-release the two others can be
in cooling position. Each station is equipped with a LED indicator which
switches on automatically when table is rotated into a cooling position.
The rotary plate prevents the user having any contact with hot holders.
Cooling process by ventilator streamed air.
Shrink grip and shrink release capacity Ø 3 to 32 mm for carbide, heavy metal,
steel and HSS tool shanks.
Automatic or programming heating modes for shrink grip and shrink release
heating cycles.
Control drives the other modules.
8