Table of Contents
Advertisement
9.3
a year
Twice
The water cooling unit must be drained off.
- Turn off the general power supply, pressing the switch at the back of the device.
Open the lid on the top of the water cooling unit (4 screws to be removed).
Simultenaously pull in opposite directions the 2 white pull studs in order to open
the tank.
Empty the tank.
Waste water is considered as polluted and must be treated according to
environmental constraints.
Fill the tank up, with pure, tap water (- 7,5 < pH < 9 - 7°F < TH < 15°F) until the
indicatedd level is reached.
Close the tank back, set the lid and screw it back. Switch on the general switch at
the back of the device.
Afterwards, perform the running of the cooling unit from the heating module.
47
Advertisement
Table of Contents
