1.5 Flange accessories
1.5.1 Finned supports
1.5.2 Support ring
1.6 COOLING ACCESORIES
1.6.1 Finned cooling tube
1.6.2 Contact bush for cooling bells
1.6.3 Air cooling cone
Available for all types of toolholders (SA30 to SA50, HSK25 to HSK100, Capto size C3 to
C8).
Required to provide positioning of the toolholder onto the support module.
Available for all types of toolholders (SA30 to SA50, HSK25 to HSK100, Capto size C3 to
C8).
Only suitable for the cooling stations, allows a direct holder positioning.
Available for all types of shrinkfit holders and diameters (5800-5801-5603-5600).
Required to receive the air stream coming through the fins.
Fins are in contact with the holder front end and offer a great contact surface for fast heat
dispersal.
Available for all types of shrinkfit holders and diameters (5800-5801-5603-5600).
Required to extract heat from the holder front end towards the liquid cooling bell.
Direct the air stream against the holder front end for cooling.
13