Table of Contents
Advertisement
8.6 Change the reference value with mode REF
How to switch from REF l to REF ll
BP1
BP1
Allows to choose the reference value with
which you want to work.
( REF I ou REF II ).
8.7 Saving the reference value with mode PRESET
VALUE TO SAVE = 249.66 MM
Saved value must correspond to the standard value or
to toolholder A dimension.
Note : value in INCH with 3 decimals,
rounded-off by 0 or 5
How to fix a value while moving the inductor housing.
2 different references can be saved :
REF I and REF II
43
inductor housing
moving
REF mode allows to fix a value by using key HOLD
while moving the rule.
Possibility to save negative values (
To validate the saved value and return to
BP1
To move the cursor
-
)
To increment the value
BP1
mode's scrolling.
Advertisement
Table of Contents
