Pack Easyshrink ® 20; Packs Delivery Content - Seco PACKS EASYSHRINK 20 Operating Instructions Manual

1.1.3 Pack Easyshrink
The height measuring fittings include:
- A fine adjustment of the sliding support using a height adjustment setting wheel.
- A digital rule to control the sliding support /comparator position (0,01 mm display).
- A comparator (0,01 mm) fi xed onto the inductor sliding support.
Achieves shorter cooling times with the refrigerated cooling bells water cooler.
The cooler includes a refrigeration unit and a support unit for cooling bells and contact bushes. Two aluminium bells
are cooled by refrigerated water and placed over contact bushes onto the front end of the holder, cooling time approx.
1 minute. There are 2 storing rests for the bells and 6 storage
locations for contact bushes.
Control drives the other modules.
Note: a refrigerated cooling bells water cooler is part of Pack Easyshrink® 20 N°3. It can be added to the the
Packs Easyshrink® 20 N° 1 and 2.

1.2 PACKS DELIVERY CONTENT

All Packs are delivered with:
A pair of gloves.
Five standard (full set) heat focusing stoppers for 3 to 32 mm, their storage rack and adapter.
A set of 4 standard stop rods in a rack.
Operating instructions.
Additonal in Packs N°1 and 2:
Two cooling cones
®
20 N°3, ZFM07IN30
A complete set with induction heating, rotary plate of 3 operating + shrink
depth setting + cooling stations, height measuring and a refrigerated
cooling bells water cooler.
Operating stations hold the finned supports with toolholder during the heating
and cooling cycles.
All three stations are operating, shrink depth setting and cooling stations :
while one station is used to shrink-grip or shrink-release the two others can
be in cooling position. Each station is equipped with a LED indicator which
switches on automatically when table is rotated into a cooling position.
The rotary plate prevents the user having any contact with hot holders.
Shrink grip and shrink release capacity Ø 3 to 32 mm for carbide, heavy
metal, steel and HSS tool shanks.
Automatic or programming heating modes for shrink grip and shrink release
heating cycles.
9