Stop Rod Accessories; Stop Rods Set, Standard, Thread Fitting; Stop Rods Set, Thin, Thread Fitting; Depth Comparator For Stop Rod Setting - Seco PACKS EASYSHRINK 20 Operating Instructions Manual

1.4 Stop rod accessories

1.4.1 Stop rods set, standard, thread fitting (Part No. ZFS07IN043)
1.4.2 Stop rods set, thin, thread fitting (Part No. ZFS07IN018)
1.4.3 Depth comparator for stop rod setting (Part No. Z847031)

1.4.4 Depth rulers for Shrinkfit depth setting

Depth ruler size 1
Depth ruler size 2
4 stop rods with 5 mm front end, covering a shrink depth capacity 0 to 240 mm: 0-60 /
60-120 / 120-180 / 180-240 mm.
Allows the tool shrinking depth setting.
When stop rod is used in combination with a digital rule with display, it allows also the
tool lenght setting.
4 stop rods with 2,5 mm front end, covering a shrink depth capacity 0 to 240 mm: 0-60
/ 60-120 / 120-180 / 180-240 mm.
Thin stop rods are for Shrinkfit holders Ø 3 à 5 mm.
When stop rod is used in combination with a digital rule with display, it allows also the
tool lenght setting.
User friendly measuring accessory to set stop rod's position for reliable Shrinkfit depth
with EasyShrink 20. The distance between stop rod's front and holder's front face is
directly readable on the comparator.
See Operating instructions 60Z847031U01-FR/GB/DE delivered with the depth
comparator.
A depth ruler is an economic alternative to the depth comparator, enabling easy
setting of the stop rods on Packs Easyshrink® 20 according to a required
Shrinkfit depth. The distance between stop rod's front and holder's face is
directly readable on the ruler.
Depth ruler size 1 (∅ 2,5 mm) for Shrinkfit holders dia. 3 to 5 mm, depth capacity
10 to 35 mm: Part No. ZFCM07IN282.
Depth ruler size 2 (∅ 5 mm) for Shrinkfi t holders dia. 6 to 32 mm, depth capacity
20 to 75 mm: Part No.ZFCM07IN254.
12