2.2.6. Depth rulers for Shrinkfit depth setting
2.2.7. Protecting gloves
Direct skin contact with hot toolholders will cause severe injuries. The use of appropriate protecting gloves is
mandatory to warranty the security of your operators. Conform to norm EN407 and EN388. Part N° ZFAG01
2.2.8. Complementary cooling devices
Complementary water cooling devices are available for faster cooling of the toolholders. Please refer to the Machining Navigator
'Tooling Systems'.
2.3.
Dimensions (when mounted)
A depth ruler is an economic alternative to the depth comparator, enabling easy setting of the stop rods
on Packs Easyshrink
20 according to a required Shrinkfit depth. The distance between stop rod's front
®
and holder's face is directly readable on the ruler.
Depth ruler size 1 (∅ 2,5 mm) for Shrinkfit holders dia. 3 to 5 mm, depth capacity 10 to 35 mm:
Part No. ZFCM07IN282.
Depth ruler size 2 (∅ 5 mm) for Shrinkfi t holders dia. 6 to 32 mm, depth capacity 20 to 75 mm:
Part No.ZFCM07IN254.
840
50KG
7