Other Accessories; Tool Supporting Sleeve For Stop Rod; Stop Screw Setting Adapter With Hexagonal Back-End; Heat Focusing Stopper - Seco PACKS EASYSHRINK 20 Operating Instructions Manual

1.7 Other accessories

1.7.1 Tool supporting sleeve for stop rod

1.7.2 Stop screw setting adapter with hexagonal back-end

1.7.3 Heat focusing stopper

Pairs of split heat focusing
stopper and ring
Standard heat focusing
stopper
Available for all tool shank diameters (Ø 3 to 32 mm).
Useful for locating the cutter back end (in contact) onto the stop rod front end.
For use instructions, see § 8.9.
Available for all tool shank diameters (Ø 6 to 32 mm).
Allows to preset the tool length with the use of a stop screw which can be fitted into
type 5603 Shrinkfit holders.
For use instructions, see § 8.10.
For positioning of the inductor housing
Capacity
focusing stopper
Ø mm
3 – 6
8 – 14
16 – 18
20 - 25
32
Locking ring
14
Standard heat Pairs of split heat
focusing stopper
ZFAT08C01
ZFAT08C02
ZFAT08C03
ZFAT08C04
ZFAT08C05
/
ZFCM08IN000
ZFCE2521
ZFCE2522
ZFCE2523
ZFCE2524
ZFCE2525