Seco PACKS EASYSHRINK 20 Operating Instructions Manual page 2

Dear Customer,
We thank you for having purchased a Pack EasyShrink 20.
®
This induction shrinking device will offer you a lot of advantages:
- automatic* or programming heating cycles
- optimised cycles to shrink-grip and shrink-release tools
- localized and homogeneous heating of the clamping area
- minimal energy consumption
- fast cooling of the tool and the toolholder
- clamping of carbide, HSS and steel tool shanks
This operating book will give you all necessary information to use this device in the best way.
Of course, our sales-team stays at your full disposal should you need some further clarifications
Your Partner,
Seco-EPB
*Working for Seco-EPB's toolholders, to be validated for others brands.
Provisions of warranty
If your product proves to be defective, although it has been used properly (in accordance with the written
Operating instructions manual supplied with it), during a period of 12 months from the date of invoicing, this
product will be repaired, or at Seco-EPB's option replaced, free of charge.
This warranty covers the material defects. Any defect that occurs due to mishandling that is not mentioned in
the Operating instructions manual, or due to an improper maintenance, etc. is not covered. Seco-EPB's sole
liability is limited to repairing or replacing the product. Any liability for indirect or consequential loss or damage
of any kind incurred or suffered by the customer due to a defect of the product, is excluded.
2