Eyboard And Mouse Interface; P S/2-Keyboard Connector; P S/2-Keyboard Configuration; P S/2-Mouse Connector - Kontron coolMonster/PM User Manual

9 K eyboard and Mouse Interface
8 B
The coolMONSTER/PM offers a PS/2-keyboard and PS/2-mouse interface on Connectors X15 and X16. The
lower interface is for the Mouse and the upper interface for the Keyboard connection. To find the
location of the keyboard and mouse connector, please see the Appendix E: Connector Layout chapter.
9.1

P S/2-Keyboard Connector

4 7 B
The following table shows the pin-out of the PS/2-keyboard connector on the front.
Header Pi Signal Name
n
1
2
3
4
5
6
Notes: (*)
To protect the external power lines of peripheral devices, make sure that:
-- the wires have the right diameter to withstand the maximum available current
-- the enclosure of the peripheral device fulfils the fire-protecting requirements of IEC/EN 60950.
9.2

P S/2-Keyboard Configuration

4 8 B
Refer to the Keyboard Features submenu and the I/O Device Configuration submenu in the Appendix B:
BIOS chapter for information on configuration.
9.3

P S/2-Mouse Connector

4 9 B
The following table shows the pin-out of the PS/2-Mouse connector on the front.
Header Pi Signal Name
n
1
2
3
4
5
6
Notes: (*)
To protect the external power lines of peripheral devices, make sure that:
-- the wires have the right diameter to withstand the maximum available current
-- the enclosure of the peripheral device fulfils the fire-protecting requirements of IEC/EN 60950.
Kontron User's Guide
coolMonster/PM
KBDAT PS/2 Keyboard data (bi-directional I/O)
MSDAT PS/2 Mouse data (bi-directional I/O)
GND
VCC *
(max. current 500mA, shared with PS/2 Mouse Con)
KBCLK PS/2 Keyboard clock (bi-directional I/O)
NC PS/2 Mouse clock (bi-directional I/O)
MSDAT PS/2 Mouse data (bi-directional I/O)
NC
GND
VCC *
(max. current 500mA, shared with PS/2 Keyboard Con)
MSCLK Mouse clock (bi-directional I/O)
NC
9 8BKeyboard and Mouse Interface
Function
Ground
+5V
Function
Not connected
Ground
+5V
Not connected
22