Table of Contents
Advertisement
Mode
Serial port C
Serial port D
Interface
Base I/O address
IRQ
Parallel Port
Mode
Base I/O address
Interrupt
DMA channel
Note:
In the Option column, bold shows default settings.
25.4.10
K eyboard Features Submenu
1 6 2 B
Feature
Numlock
Key Click
Keyboard auto-repeat rate
Keyboard auto-repeat delay
Note:
In the Option column, bold shows default settings.
Kontron User's Guide
coolMonster/PM
Auto
Normal,
IR
Disabled
Enabled requires end user to enter the base I/O address and
Enabled
Auto
Disabled
Enabled requires end user to enter the base I/O address and
Enabled
Auto
RS232,
RS485
3F8h, 2F8h, 3E8h, 2E8h,
220h, 228h
IRQ 3, IRQ 4, IRQ10, IRQ11
Disabled
Enabled
Auto
Output only
Bi-directional
EPP
ECP
EPP & ECP
378h, 278h, 3BCh
IRQ 5, IRQ 7
DMA1, DMA3
Option
Auto
On
Off
Disabled
Enabled
30/sec, 26.7/sec, 21.8/sec, 18,5/sec,
13.3/sec, 10/sec, 6/sec, 2/sec
¼ sec, ½ sec, ¾ sec, 1 sec
68
25 24BAppendix B: BIOS Operation
the IRQ.
Auto makes the BIOS configure the port.
Set the mode for Serial Port B.
Disabled turns off the port.
the IRQ.
Auto makes the BIOS configure the port.
Disabled turns off the port.
the IRQ.
Auto makes the BIOS configure the port.
Set the mode for Serial Port D.
Select I/O base of port.
Select IRQ
Set the mode for Parallel Port
Select I/O base of port.
Select IRQ
Set the DMA channel for the parallel port in ECP mode
Description
On or Off turns NumLock on or off at boot up.
Auto turns NumLock on if it finds a numeric key
Turns audible key click on.
Sets the number of times to repeat a keystroke
per second if you hold the key down.
Sets the delay time after the key is held down
before it begins to repeat the keystroke.
pad.
Advertisement
Table of Contents
