Kontron coolMonster/PM User Manual page 63

Hide thumbs Also See for coolMonster/PM:
Table of Contents

Advertisement

25.3.1
M aster or Slave Submenus
1 5 2 B
Feature
Type
Cylinders
Heads
Sectors
Maximum Capacity
Total Sectors
Maximum Capacity
Multi-Sector Transfer
LBA Mode Control
32-Bit I/O
Transfer Mode
Ultra DMA Mode *
SMART Monitoring
Note:
In the Option column, bold shows default settings.
(*) The CompactFlash IDE interface is not capable of running UDMA modes. On the 40 pin IDE interface an
80line UDMA 100 cable is required for proper operation in modes UDMA 3 and higher.
Kontron User's Guide
coolMonster/PM
Option
None = Autotyping is not able to supply the drive type or end user
None
has selected None, disabling any drive that may be installed.
User
Auto
Auto = Autotyping. The drive itself supplies the information.
CD-ROM
IDE Removable
ATAPI Removable = Read- and writeable media e.g. LS120 and
ATAPI Removable
Other ATAPI = for ATAPI devices not supported by other HDD
Other ATAPI
1 to 65,536
1 to 256
1 to 63
N/A
N/A
N/A
Disabled
2 sectors
4 sectors
8 sectors
16 sectors
Disabled
Enabling LBA causes Logical Block Addressing to be used in place
Enabled
Disabled
Enables 32-bit communication between CPU and IDE card.
Enabled
Standard
Fast PIO 1
Fast PIO 2
Selects the method for transferring the data between the hard
Fast PIO 3
Fast PIO 4
FPIO 3 / DMA 1
FPIO 4 / DMA 2
Disabled
MOD0
MOD1
Selects the UDMA mode to move data to/from the drive. Autotype
MOD2
the drive to select the optimum transfer mode. This feature is
MOD3
MOD4
MOD5
Disabled
Enabled
63
25 24BAppendix B: BIOS Operation
Description
User = End user supplies hdd information.
CD-ROM = CD-ROM drive.
USB-ZIP
features.
Number of cylinders.
Number of read/write heads.
Number of sectors per track.
Displays the calculated size of the drive in CHS.
Number of total sectors in LBA mode.
Displays the calculated size of the drive in LBA.
Any selection except Disabled determines the
number of sectors transferred per block.
The standard is one sector per block.
of CHS.
Requires PCI or local bus.
disk and system memory.
autodetected.
Shows whether a disk supports SMART.

Advertisement

Table of Contents
loading

Table of Contents