Table of Contents
Advertisement
6
S ystem Memory
5 B
The coolMONSTER/PM supports 184-pin DIMM DDR-SDRAM memory modules. One socket is available for
2.5V (power level), unbuffered double data rate synchronous dynamic random access memory (DDR-
SDRAM) up to 1024MB following Intel's DDR333/PC2700 Specification.
The supported devices on the DDR-SDRAM module must be 128-Mbit, 256-Mbit or 512-Mbit technologies
chips. All modules validated by Intel with the 845 chipset and minimum DDR266 speed are electrical
ready with the 855 chipset (A similar memory interface is used on the two chipsets.)
Notes: Some older modules and modules out of specification are designed for 2.7V (power level). These modules
may not work well at the coolMONSTER/PM.
The total amount of memory available on the DDR-SDRAM modules is used for main memory and graphics
memory on the coolMONSTER/PM. Unified Memory Architecture (UMA) manages the sharing of the
system memory between the graphics controller and processor. Full system memory size is not available
for software applications. Up to 32MB of system memory are used for graphics memory.
Memory modules with ECC are not supported.
Kontron User's Guide
coolMonster/PM
19
6 5BSystem Memory
Advertisement
Table of Contents
