Kontron coolMonster/PM User Manual page 86

X7 X8
1 TXD+ RECHTS
2 TXD- ASGND
3 RXD+ LINKS
4 NC ** AUXAR_C
5 NC ** MIC_C
6 RXD- AUXAL_C
7 NC **
8 NC **
Notes: (*) To protect the external power lines of peripheral devices, make sure that:
-- the wires have the right diameter to withstand the maximum available current
-- the enclosure of the peripheral device fulfils the fire-protecting requirements of IEC/EN 60950.
(**) Do not connect anything to these signals.
(***) The internal USB port 3 is not protected on the power lines. An additional resetable fuse is
recommended.
Kontron User's Guide
coolMonster/PM
X16 X15
KBDAT MSDAT
MSDAT NC
KEYGND KEYGND
KEYVCC * KEYVCC *
KBCLK MSCLK
MSCLK NC
86
28 27BAppendix E: Connector Layout
X13 X3
USB_5V USB_5V
USB- USB-
USB+ USB+
USB_GND USB_GND
X23 X24
+12V * Sense
VCC * 5V *
VCC * GND
GND
GND