Table of Contents
Advertisement
25.7.2
B oot First Function
1 7 1 B
Display the Boot First function by pressing <Esc> during POST. In response, the BIOS displays the
message Entering Boot Menu and then displays the Boot Menu at the end of POST. With the MultiBoot XP
feature only devices detected during boot up are displayed.
Use the menu to select a following option:
Override the existing boot sequence (for this boot only) by selecting another boot
®
device. If the specified device does not load the OS, the BIOS reverts to the previous
boot sequence.
Enter Setup.
®
Press <Esc> to continue with the existing boot sequence.
®
25.8
E xit Menu
1 1 0 B
The following sections describe the five options in Exit Menu. Pressing <Esc> does not exit this menu.
You must select an item from the menu to exit.
Feature
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Kontron User's Guide
coolMonster/PM
Option
Saves selections and exits setup. The next
time the system boots, the BIOS configures
the system according to the Setup selection
stored in CMOS.
Exits Setup without storing in CMOS any new
selections you may have made. The
selections previously in effect remain in
effect.
Displays default values for all the Setup
menus.
If, during a Setup session, you change your
mind about changes you have made and
have not yet saved the values to CMOS, you
can restore the values you saved to CMOS.
Saves all the selection without exiting
Setup. You can return to the other menus to
review and change your selection.
76
25 24BAppendix B: BIOS Operation
Description
Exit saving changes.
Exit discarding changes.
Load setup defaults.
Discard changes.
Save changes.
Advertisement
Table of Contents
