Connecting to an Ethernet Cable
Two types of network connectors are included on your workstation. Each type
requires different equipment and installation procedures, as explained in the
following sections.
IMPORTANT:
RJ-45 and AUI connectors simultaneously.
Attaching a Network Cable to the RJ-45
Connector
Insert one end of the network cable into the main network connection and
the other end into the RJ-45 connector on your workstation as shown in
the following figure. Make sure both connectors are securely joined.
Figure 5-2.
To avoid configuration problems, do not attempt to utilize the
Attaching the network cable to the RJ-45 connector
Compaq Professional Workstation 6000 and 8000 Reference Guide
5-3