Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the
disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive
2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the qty of items contained within the product which require selective treatment in the right column, as applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
3 or 4
(main sys
bd, 2 or 3
power
supply)
1
5, 8, or 4
depending
on power
supply
Advertisement
Related Manuals for HP Compaq dc5700 Small Form Factor Business
Summary of Contents for HP Compaq dc5700 Small Form Factor Business
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
-
Page 2: Power Supply
To remove the power supply PCA: HP uses three different power supplies from three different vendors in these computers. Use the following steps to determine which power supply you have and its required disassembly procedures. - Page 3 h. Remove the top PCA from the power supply. i. Cut the two large capacitors from the PCA (see Figure 11). j. Remove two screws from the black plastic piece on the bottom of the inside of the power supply (see Figure 12).
Need help?
Do you have a question about the Compaq dc5700 Small Form Factor Business and is the answer not in the manual?
Questions and answers