Memory Problems - HP Compaq 6000 Install Manual

8-14 Troubleshooting
Network Problems and Solutions
Network controller
stopped working
without apparent
cause.

Memory Problems

Out of Memory
error
Memory count
during POST is
wrong
Insufficient
memory error
during operation
Problem
The files containing the
network drivers are
corrupted.
The cable is not securely
connected.
The network controller is
defective.
Memory Problems and Solutions
Problem
Memory configuration may
not be set up correctly.
You have run out of memory
to run the application.
The memory modules may
not be installed correctly.
You have run out of memory
for your application.
continued
Possible Cause
Table 8-8
Possible Cause
Possible Solution
Reinstall the network drivers
using your Compaq SmartStart
for Workstations CD.
Ensure that the cable is securely
attached to the network
connector and that the other end
of the cable is securely attached
to the correct device.
Contact your Compaq authorized
service provider.
Possible Solution
Run Computer Setup.
Check the application
documentation to determine the
memory configuration
requirements.
Check that the memory modules
have been installed correctly and
run the Setup utility.
Check the memory requirements
for the application, or add more
memory to the workstation.