Connecting The Telephone Cable - HP Brio 8200 Getting Started Manual

7
7

Connecting the Telephone Cable

(if applicable)
Connect the telephone cable to the modem on the back of your computer, using the most appropriate configuration.
8
8
Connecting the Computer and Display Power Cords
VOLTAGE SWITCH
Check that the voltage of your computer
is set to the correct value for the coun-
try that you are in.
The voltage is displayed on the back of the
computer, above the computer power
socket.
Connect the power cords to the computer
and display as shown in the illustration.
Plug both cords into grounded electrical out-
lets.