Installing A Processor - HP Compaq 6000 Install Manual

Figure 2-16.
7. Align the rails and slide the hard drive into the drive cage.
8. Connect the signal and power cables.

Installing a Processor

This section provides an overview for installing an additional Pentium Pro or
Pentium II processor. For complete installation procedures, refer to the
documentation provided with the processor upgrade kit. Additional information
is also available on the Quick Setup Poster and the hood labels.
To install an additional processor:
1. If the workstation is on, turn it off and disconnect the power cord.
2. Disconnect any other external equipment.
3. Unlock and open the front bezel.
Installing a hard drive
tulan034 .EPS
Compaq Professional Workstation 6000 and 8000 Reference Guide
2-23