Locating The Expansion Slots - HP Compaq 6000 Install Manual

2-12 Hardware Upgrades

Locating the Expansion Slots

The expansion cage is located directly beneath the small access panel and
contains six expansion slots:
The following figure shows a rear view of the workstation. Expansion boards
can be installed in the slots identified.
Figure 2-6.
Four shared PCI/ISA expansion slots (slots 1 - 4)
Two dedicated PCI local bus expansion slot (slots 5 and 6)
NOTE: Although there are two physical connectors (one ISA and one PCI) for
each shared PCI/ISA slot, the connectors are placed so that only one of the
connector slots can have a board installed at a time.
Identifying expansion slots
TULAN009.EPS
1 2 3 4 5 6 1 2 3 4 5 6