Gloria-L 3D Graphics Controller; Upgrading Memory; Installing An Additional Controller - HP Compaq 6000 Install Manual

GLoria-L 3D Graphics Controller

The GLoria-L 3D graphics controller offers the following key features:
8-MB VRAM for display memory
8-MB DRAM for Z-buffer and texture buffer upgradable to 16-MB
Single monitor support, expandable to multiple monitor support by
installing additional controllers

Upgrading Memory

To install a memory upgrade module on the GLoria-L 3D graphics controller,
refer to the documentation included in the memory upgrade kit.

Installing an Additional Controller

The GLoria-L 3D graphics controller installed on your workstation provides
single-monitor support. To upgrade your workstation to a multiple-monitor
system, you must install an additional controller. Additional GLoria-L 3D
graphics controllers are available through your local Compaq distributor or
service provider. Refer to the documentation included in the option kit for
installation procedures.
Compaq Professional Workstation 6000 and 8000 Reference Guide
7-9