5-4
Network Communications
Attaching a Network Cable
to the AUI Connector
Attach one end of the network cable to the main network connector and attach
the other end to the AUI connector on your workstation. Make sure both
connectors are securely joined.
Attaching the network cable to an AUI connector
Figure 5-3.
Installing the Network Drivers
The device drivers in the network software enable the workstation to
communicate with the network. For information about installing drivers,
operating systems, and other support software, refer to the Workstation
Reference included on the SmartStart for Workstations CD.
Changing the Default Configuration
To change the default configuration settings, run the Setup utility. SeeChapter 4
for instructions.