HP Compaq 6000 Install Manual page 2

5. Click Express, then click Update.
6. When the support software has been installed, click
Exit.
7. When prompted, restart your system to activate the
installed drivers and remove the CD.
For more information about using the Compaq SSD for
Windows NT, click Help in the main Setup window.
Installing the Support Software for
Windows NT Workstation 3.51
IMPORTANT Before you can install the support software for your controller,
you must download the Compaq SSD for Windows NT from the Compaq
website at http://www.compaq.com. Use v1.20C or later in diskette format.
To install the support software for the controller, follow these steps:
1. With Windows NT Workstation 3.51 installed and
running, log in with administrator privileges.
2. Insert SSD diskette 1.
3. From the Program Manager menu, select File, Run.
4. Type A:\SETUP.EXE, then click OK.
5. Click Express, then click Update.
6. When the support software has been installed, click
Exit.
7. When prompted, restart your system to activate the
installed drivers and remove the diskette.
For more information about using the Compaq SSD for
Windows NT, click Help in the main Setup window.
1998 Compaq Computer Corporation. All rights reserved.
Compaq, SmartStart, registered United States Patent and Trademark Office.
Netelligent is a trademark of Compaq Computer Corporation.
Microsoft, MS-DOS, and Windows NT are registered trademarks of
Microsoft Corporation.
Third Edition (July 1998)
Part Number 269458-003