Compaq Setup And Diagnostics Software; Accessing The Compaq Utilities Menu - HP Compaq 6000 Install Manual

Chapter 4
Compaq Setup and Diagnostics
Software
Your Compaq Professional Workstation comes with Compaq software. This
software includes Compaq Utilities preinstalled on a hard drive partition and
ROM BIOS (Read Only Memory Basic Input/Output System). This chapter
explains how to access the Compaq Utilities menu, describes the options
available in Compaq Utilities, and discusses the ROM BIOS. For more specific
information about this software, see the online help.
If you have reformatted your hard drive and removed the Compaq Utilities
partition, it can be reinstalled by using the Compaq SmartStart for Workstations
CD, or you can download Setup and User Diagnostics diskettes from the
Compaq website at http://www.compaq.com.
NOTE:
and other support software, refer to the Workstation Reference included on the
Compaq SmartStart for Workstations CD.

Accessing the Compaq Utilities Menu

To access the Compaq Utilities menu:
1. Turn on or restart the workstation.
NOTE:
Windows NT, then restart the workstation.
2. When the cursor blinks in the upper-right corner of the screen, press
F10. You have approximately two seconds to press F10 or you must
restart the workstation.
3. Press Enter to bypass the title and welcome screens. The Compaq
Utilities menu appears.
For more information about installing your operating system, drivers,
Do not restart your workstation while in Windows NT. Instead, exit
Compaq Professional Workstation 6000 and 8000 Reference Guide
4-1