View System Information (Inspect) - HP Compaq 6000 Install Manual

6. Select one of the following from the test option menu:
7. Follow the instructions on the screen as the diagnostic tests are run on
the devices. When the testing is complete, the screen displays the test
option menu again.
NOTE:
them available when you contact your Compaq authorized dealer, reseller, or
service provider for assistance.
8. Exit to the Compaq Utilities menu.

View System Information (INSPECT)

Use View System Information (INSPECT) in the following instances:
To view information about the system once it has been configured.
To save, print, or display the information generated by INSPECT. It is
recommended that you run INSPECT and have the printed report
available before placing a call to the Compaq Customer Support Center.
To assist your Compaq authorized dealer, reseller, or service provider in
analyzing the system by allowing the service provider to reproduce the
same environment on another workstation for testing.
Quick Check Diagnostics—This option runs a quick, general test
on each device with a minimal number of prompts. If errors occur,
they are displayed when the testing is complete.
Automatic Diagnostics—This option runs unattended, maximum
testing of each device with minimal prompts. You can choose how
many times to run the tests, to stop on errors, or to print or file a log
of errors.
Prompted Diagnostics—This option allows maximum control over
the device testing process. You can choose attended or unattended
testing, decide to stop on errors, or choose to print or file a log of
errors.
When running TEST, record any error message numbers and have
Compaq Professional Workstation 6000 and 8000 Reference Guide
4-5