Gs1 Databar™ Expanded Set Length 2 - Datalogic PowerScan 9500 Series Product Reference Manual

Enter/Exit Programming Mode
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the bar code lengths for
Expanded Length
able Length
Length includes the bar code's data characters only. The length can be set
from 1 to 74 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table 19
instructions on setting this feature.
Table 19. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CXBL2
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
156
Control. Length 2 is the maximum label length if in
Mode, or the second fixed length if in
provides examples for setting Length 2. See
EXAMPLES
00 (ignore sec-
ond length)
'0' and '0'
74 = Length 2 is 74 Characters
DEFAULT
Fixed Length
07 Characters 52 Characters
'0' and '7' '5' and '2'
~
CANCEL
PowerScan™ PD9530/PBT9500/PM9500
GS1 DataBar™
Vari-
Mode.
page 268 for detailed
74 Characters
'7' and '4'