Standard 2 Of 5 Set Length 2 - Datalogic PowerScan 9500 Series Product Reference Manual

Enter/Exit Programming Mode

Standard 2 of 5 Set Length 2

This feature specifies one of the bar code lengths for
Control. Length 2 is the maximum label length if in
or the second fixed length if in
code's check and data characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 11
instructions on setting this feature.
Table 11. Standard 2 of 5 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CS2L2
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
132
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Variable Length
Fixed Length Mode. Length includes the bar
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
CANCEL
PowerScan™ PD9530/PBT9500/PM9500
Standard 2 of 5 Length
Mode,
page 268 for detailed
50 Characters
'5' AND '0'