Changing From Compatible Mode Back To Normal - Datalogic PowerScan 9500 Series Product Reference Manual

BC9xxx Base
The BC9xxx can be changed from Normal to Compatible mode using the
Aladdin configuration tool. See
information. This will allow you to Join or Bind a PM8500 to your BC9xxx.

Changing from Compatible Mode back to Normal

PM9500 Handheld
1. With the PM9500, read a Compatible mode programming label on
2. With the PM9500, read the Unlink programing label.
3. Now you can link your PM9500 to a BC9xxx in normal mode; the
BC9xxx Base
1. Using Datalogic Aladdin, change the Compatible Mode parameter to
2. Now you can link a previously unlinked PM9500; the reader will inherit
If Aladdin is not available, use the following procedure:
1. With a PM9500 in normal mode, read the Unlink programming label on
2. Place the same PM9500 on your BC9xxx.
Your BC9xxx will link to the PM9500 and will inherit the reader's pro-
grammed speed.
Product Reference Guide
page 238 with a value of "Low, Medium, or High Speed".
PM9500 will inherit the programmed speed from the BC9xxx.
"Low, Medium, or High Speed".
the speed programmed in the BC9xxx.
page 19, then read the following bar code:
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
Enter/Exit Programming Mode
"Datalogic Aladdin™"
Return to Normal
on page 6 for more
239