2D Global Features
PDF417 Set Length 2
This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in Variable Length Mode, or
the second fixed length if in Fixed Length Mode. Length includes the bar
code's check, data, and full-ASCII shift characters. The length does not
include start/stop characters. Characters can be set from 01 to 2,710 char-
acters (pad with zeroes) in increments of 01. Any value greater than 2,710
will be considered to be 2,710.
See
page 268
$CP4L2
Select PDF417 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
for detailed instructions on setting this feature.
Length 2 is 2,710 Characters
DEFAULT
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
PDF417 Length Con-
repre-
191