Installing Applications And Dmi Support; To Install Omnibook Applications; To Install Dmi Support - HP OmniBook 800 Evaluator Manual

Installing Applications and DMI Support

Requirements
OmniBook 800 with Windows 95 installed.
HP OmniBook DMI software.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\DMI.
HP OmniBook applications software.
Location: Recovery CD in \OMNIBOOK\HPUTILS.

To install OmniBook applications

1. From the \OMNIBOOK\HPUTILS\DISK1 directory on the Recovery CD,
double-click SETUP.EXE. The OmniBook Setup menu appears.
2. Click Next at the Welcome screen.
3. Select the HP applications to install, then click Install Now.
4. Click Restart.

To install DMI support

1. From the \OMNIBOOK\DRIVERS\WIN95\DMI\DISK1 directory on the Recovery
CD, double-click SETUP.EXE.
2. Click Next at the Welcome Screen.
3. Read the Release Notes, then click Yes to continue the installation.
4. Click Next to accept the default directory (C:\SVA).
5. Enter your information, then click Next.
6. The serial number is the default Asset number. If you company uses its own
inventory system, enter the appropriate asset number, then click Next.
7. Read the SMS Support Readme file, then click Yes to install SMS support.
8. Shut down and restart Windows 95.
Using Windows 95
Installing Applications and DMI Support
3-11