To Install Video Support - HP OmniBook 800 Evaluator Manual

Using Windows 95
Installing Windows 95
38. Click Remove, then click OK.
39. Click Close.
40. Go to the \OMNIBOOK\DRIVERS\WIN95\MISC\WINDOWS\INF directory.
41. Copy the .INF files to the C:\WINDOWS\INF directory.
42. Shutdown and restart Windows 95.

To install video support

Requirements
OmniBook 800 with Windows 95 installed.
OmniBook 800 driver for video support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\VIDEO.
1. From Control Panel, double-click Display, then click Settings.
2. Click Change Display Type.
3. Under Adapter Type, click Change.
4. Click Have Disk.
5. Enter the directory of the video drivers, then click OK.
6. Click OK to select NeoMagic 128ZV.
7. Under Monitor Type, click Change.
8. Under Models, choose Laptop Display Panel (800x600), then click OK.
9. Click Close.
10. Select the correct Desktop Area for the OmniBook you are using. Choose High
Color if desired.
11. Click Close in Display Properties, then click Yes to restart the computer now.
When you connect the CD-ROM or dock the OmniBook, you'll need to set the
video mode in each configuration.
3-6