To Install Drivers, Applications, And Online Manuals; To Use The Recovery Cd Programming Service - HP OmniBook 800 Evaluator Manual

Introduction
Recovering Files, Drivers, and Applications

To install drivers, applications, and online manuals

The Drivers directory on the Recovery CD contains device drivers for common
operating systems. Updated drivers may be available from HP Electronic Support.
See page 1-9 for a complete list of installation tools.
The Recovery CD can reinstall HP OmniBook applications including Appointment
Book, Phone Book, Calculator, the online User's Guide, OmniBook Tools, and
diagnostics. These applications work in Windows 3.x or Windows 95. To install any
of these programs, complete the following steps:
1. Connect your CD-ROM drive.
2. Insert the Recovery CD in the CD-ROM drive.
3. From the \OMNIBOOK\HPUTILS\DISK1 directory on the CD, double-click
SETUP.EXE.
The OmniBook Application Software Setup menu appears.
4. Select the appropriate applications, then click Install Now.

To use the Recovery CD programming service

If you need to recover an operating system, OmniBook drivers, or any other
program on the Recovery CD, but do not have access to a CD-ROM drive, HP Service
can recover these files for you. The cost is a standard charge equal to one-half the
hourly labor rate. This service is available for the OmniBook Recovery CD only.
Microsoft CDs and other non-HP CDs do not qualify for this service.
1-10