To Install Sound Support - HP OmniBook 800 Evaluator Manual

Important
Using OS/2 Warp 4.0
Installing OS/2 Warp 4.0
13. Open the OS/2 System folder, then System Setup, then double-click on System.
14. Select OmniBook 800CT 800x600 65,536 Colors, then click OK
15. Shut down, then reboot.
16. See "Changing Screen Resolution" in the OS/2 User's Guide for more
information.
Use SETUP.CMD for the first installation of these video device drivers;
thereafter, to change video resolutions, repeat from step 16.

To install sound support

Requirements
OmniBook 800 with OS/2 Warp 4.0 Installed.
HP OmniBook drivers for sound support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\OS2\SOUND.
1. Insert the OmniBook 800 OS/2 Drivers disk.
2. Open an OS/2 Command Prompt.
3. Go to A:\.
4. Type EINSTALL 1887.
5. From the IBM Multimedia Presentation Manager/2 - Installation Windows, Select
ES1887 WinOS2/Windows Audio if you installed OS/2 WinOS2 support and
click Install.
6. Click Yes to Change the CONFIG.SYS
7. Click OK to Specify 1 AudioDrive ES1887.
8. Set the following values and click OK.
I/O Address
DMA Channel
DMA 2
Interrupt Level
DMA Transfer Mode
6-8
220
1
5
5
4