Installing Applications And Dmi Support; To Install Omnibook Applications; To Install Dmi Support - HP OmniBook 2000 Evaluator Manual
Hp omnibook 2000: user guide
Hide thumbs
Also See for OmniBook 2000:
- User manual (69 pages) ,
- Service manual (119 pages) ,
- Installation and setup manual (101 pages)
Table of Contents
Advertisement
Using Windows 95
Installing Applications and DMI Support
Installing Applications and DMI Support
Requirements
OmniBook 2000/5700 with Windows 95 installed.
HP OmniBook DMI software.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\DMI.
HP OmniBook applications software.
Location: Recovery CD in \OMNIBOOK\HPUTILS.
To install OmniBook applications
1. From the \OMNIBOOK\HPUTILS\DISK1 directory on the Recovery CD,
double-click SETUP.EXE.
The OmniBook Application Software Setup menu appears.
2. Click Next at the Welcome screen.
3. Select the HP applications to install, then click Install Now.
4. When prompted, click Restart.
To install DMI support
1. From the \OMNIBOOK\DRIVERS\WIN95\DMI directory on the Recovery CD,
double-click SETUP.EXE.
2. Read the Release Notes, then click Yes to continue the installation.
3. Click Next to accept the default directory (C:\SVA).
4. Enter your information, then click Next.
5. The serial number is the default Asset number. If you company uses its own
inventory system, enter the appropriate asset number, then click Next.
6. Read the SMS Support Readme file, then click Yes to install SMS support.
7. Shut down and restart Windows 95.
3-14
Advertisement
Table of Contents
