Installing Cards; To Install A Xircom Ethernet Iips Pc Card - HP OmniBook 800 Evaluator Manual

Corporate evaluator’s guide
Hide thumbs Also See for OmniBook 800:
Table of Contents

Advertisement

Installing Cards

This section describes how to install the following:
Xircom Ethernet IIps PC card.
3Com 3C562 EtherLink III LAN+33.6 Modem PC card.
Intel EtherExpress PRO/100B PCI LAN adapter.

To install a Xircom Ethernet IIps PC card

Requirements
OmniBook 800 with Windows NT 4.0 installed.
Xircom Ethernet IIps PC card.
Windows NT 4.0 CD-ROM.
Configuration
I/O Port: 0x300.
Memory Address: 0xD4000.
Interrupt: 11.
Mode: I/O Mode.
Cable Type: Auto Detect.
This procedure assumes that Windows NT Networking has not been installed.
1. Insert the PC card and restart Windows NT 4.0.
2. From Control Panel, double-click Network.
3. Click Yes to begin the Windows NT Network Installation.
4. Check Wired to network, then click Next.
5. Click Select from list, select the Xircom CreditCard Ethernet IIps, then click OK.
6. Click Next to accept the Xircom CreditCard Ethernet IIps.
Using Windows NT 4.0
Installing Cards
5-11

Advertisement

Table of Contents
loading

Table of Contents