To Install An Infrared Driver; To Install Scsi Support - HP OmniBook 800 Evaluator Manual

To install an infrared driver

Requirements
OmniBook 800 with Windows 95 installed.
HP OmniBook driver for infrared support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\IRDA.
1. Click the Start menu, Programs, then the MS-DOS Prompt.
2. Type: CD \OMNIBOOK\DRIVERS\WIN95\IRDA.
3. Type: XCOPY /S /E /V WINDOWS C:\WINDOWS.
4. If prompted to overwrite old files, click Yes.
5. Type: REGEDIT IRDA.REG.
6. Close the MS-DOS Prompt.
7. Shutdown and restart Windows 95.

To install SCSI Support

Requirements
OmniBook 800 with Windows 95 installed.
OmniBook 800 driver for SCSI support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\WIN95\SCSI.
1. Go to the SCSI driver directory.
2. Copy the file SCSI.INF to the C:\WINDOWS\INF directory.
3. Click Yes to overwrite the old .INF file with the new .INF file.
4. Connect the External CD-ROM to the OmniBook 800.
5. Open My Computer, Control Panel, then System.
6. Click the Device Manager tab.
Using Windows 95
Installing Windows 95
3-9