To Install Pc Card Support - HP OmniBook 800 Evaluator Manual
Corporate evaluator’s guide
Hide thumbs
Also See for OmniBook 800:
- Installation and setup manual (88 pages) ,
- User manual (79 pages) ,
- Getting started manual (54 pages)
Table of Contents
Advertisement
Using Windows NT 3.51
Installing Windows NT 3.51
9. Select Symbios Logic PCI (53L8XX), then click OK.
10. Confirm the correct adapter is selected and click Install.
11. Confirm the correct directory of the SCSI driver and click Continue.
12. Click Cancel to disable Fast 20 support.
13. Click Close and exit Windows NT Setup.
14. Close Windows NT Setup.
15. Click OK to confirm you must restart.
16. Shutdown and restart Windows NT.
To install PC card support
Requirements
OmniBook 800 with Windows NT 3.51 installed.
OmniBook 800 drivers PC card support.
Location: OmniBook hard drive or Recovery CD in
\OMNIBOOK\DRIVERS\NT\PCMCIA.FIX.
1. Using File Manager, locate PCMCIA.SYS in the following directory:
C:\ <current WinNT dir>\system32\driver.
2. Rename the file to PCMCIA.OLD.
3. Copy the HP provided PCMCIA.SYS file from the directory of the PC card driver
to C:\<current WinNT dir>\system32\driver.
4. Shut down and restart Windows NT to activate the PC card driver.
4-8
Advertisement
Table of Contents
