To Create Os/2 Driver Disks; To Set Up Os/2 Warp Installation Disks - HP OmniBook 800 Evaluator Manual
Corporate evaluator’s guide
Hide thumbs
Also See for OmniBook 800:
- Installation and setup manual (88 pages) ,
- User manual (79 pages) ,
- Getting started manual (54 pages)
Table of Contents
Advertisement
Using OS/2 Warp 4.0
Installing OS/2 Warp 4.0
To create OS/2 driver disks
You must install OS/2 drivers from floppy disk drive. To create OS/2 OmniBook 800
driver disks do the following:
1. Copy the contents of \OMNIBOOK\DRIVERS\OS2\VIDEO to a blank floppy disk.
2. Type LABEL A: MAGIC 1. Label the Disk OS/2 OmniBook 800 Video Driver Disk.
3. Copy the contents of \OMNIBOOK\DRIVERS\OS2\SOUND to another blank
floppy disk.
4. Copy the contents of \OMNIBOOK\DRIVERS\OS2\SCSI to another blank floppy
disk.
To set up OS/2 Warp installation disks
You must add the SCSI driver to the OS/2 Warp installation disk 1:
1. Delete the file AHA152X.ADD from OS/2 Warp installation disk 1.
2. Copy OS2CAM.ADD from \OMNIBOOK\DRIVERS\OS2\SCSI to disk 1.
3. Edit the CONFIG.SYS on the OS/2 Warp installation disk 1
4. Add the following lines:
BASEDEV=OS2CAM.ADD
SET COPYFROMFLOPPY=1.
5. Change the following line:
BASEDEV=AHA152X.ADD
to
REM BASEDEV=AHA152X.ADD
6. Save and close CONFIG.SYS.
6-4
Advertisement
Table of Contents
