To install the online User's Handbook
You can install the online User's Handbook from the Recovery CD. This also installs
OmniBook Notes and Support files to your hard drive.
1. Connect the ac adapter to the OmniBook.
2. Install the CD-ROM drive in the OmniBook.
3. Insert the Recovery CD in the CD-ROM drive.
4. From the \OmniBook\Hputils\Disk1 directory on the CD, double-click
SETUP.EXE. The OmniBook Application Software Setup screen appears.
5. Click Next.
6. Click "OmniBook Online Documentation."
7. Click Install Now.
To replace a damaged Recovery CD
If you lose or damage the Recovery CD, take your OmniBook and Certificate of
Authenticity to an HP Service Center to be replaced. If you mail your OmniBook for
this service, you must provide a photocopy of the Certificate of Authenticity along
with payment.
To get drivers for other operating systems
The Recovery CD provides the drivers for your factory-installed operating system
only. If you install a retail version of Windows 95, Windows 98, or Windows NT, you
will need the OmniBook-specific drivers to configure your custom system.
The drivers and the installation instructions for all three of these operating systems
are located on the OmniBook website at http://www.hp.com/omnibook
Using the Recovery CD
Recovering Software
6-5