Program 701 - Financial Report Message Programming - Sam4s ER-230 Series Operation And Programming Manual

Program 701 - Financial Report Message Programming

Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To use three digit alpha character codes you must select 'No' in system
option #25 (See "System Option Programming). Also see Descriptor Programming Methods for
Alpha Overlay and/or Descriptor Code Table.
Programming the Financial Report Message
The Financial Report selection allows you to reprogram the descriptors that appear with the
Financial Report totals and counters. For example, the first total on the financial report
"+PLU TTL" represents the total of all positive PLU entries. You might wish to re-label this
total to say "FOOD SALES". You can reprogram any of the Financial Report totals listed
here with any 12-character descriptor. (See "Financial Report Message").
1. Switch to P Mode by press MODE function key.
2. To begin the program, enter 7 0 1, press the SBTL key.
3. Refer to the chart below and enter the number that represents the line you wish to
program; press the X/TIME key.
4. If you are programming using alpha overlay,
three-character codes
5. Press the CASH key to finalize the program.
Sam4S ER230 Series Electronic Cash Register AU
7 0 1 SBTL
X X/TIME
Type up to 12
descriptor keys
or,
Enter up to 12
CASH
SBTL
SBTL
Program Mode Programming • 141