Print Option Programming - Sam4s ER-180T Series Operation And Programming Manual

Print Option Programming

The register operation can be tailored using the following options. In order to
change each option the question is entered followed by the answer, both of
these entries are numeric and are shown on the subsequent page.
Programming a Print Option:
• Insert the key stamped C and turn to the PGM position
• Enter 40 and press the SUBTOTAL key
• Enter a question number 1,2,3 etc and then press the X/TIME key
(Question and answer table shown following)
• Enter the answer and press SUBTOTAL
I.e. Press 5 X/TIME 1 SUBTOTAL to allow a copy receipt to be issued
Question
5
• Repeat with the next question
• Press the CASH/TEND key and return to the REG position
4
Note: See following for question and answer table
• • • • 54 Program Mode
Answer Explanation
1
Allow a copy receipt to be issued
*
0 Do not allow a copy receipt
0
Question No. X/TIME
1 - 29
Answer
1 or 0
CASH / TEND
SUBTOTAL
SUBTOTAL
(=)