Print Option Programming - Sam4s ER-380M Operation And Program Manual

Print Option Programming

Refer to the "Print Option Table" to review the print options. Read each option carefully to determine if you wish to make
any changes.
NOTE: After clearing memory all option settings are automatically set to 0, and because your
most likely option selections require a status setting of 0, you do not need to program this
section unless you wish to change the default status.
Programming a Print Option:
Print Option Flowchart
4
ER380
1. Turn the control lock to the P position.
2. Enter 4 0, press the SBTL key.
3. Enter a print option address, press the X/TIME key.
4. Enter the number representing the status you have selected, or if there is more
than one decision to be made in an address, add the values representing your
choices for each decision and enter the sum. Press the SBTL key.
5. Repeat from step 3 for each print option that you wish to change.
6. Press the CASH key to end print option programming.
0 SBTL
Option #
System option is Overlay descriptor
method and Index is 8,14,15,16,17
Repeat for each
Print Option
X/TIME
Status
X/TIME
Program Mode Programming • 103
SBTL CASH