Features And Functions - norbar ET2-72-1000-110 Operator's Manual

FEATURES AND FUNCTIONS

Top handle / lifting bracket
for safe tool use
Strain
relief

4 operational modes – Torque, Torque & Angle, Torque & Angle with Final Torque or Torque Audit.
Mode
Torque
Torque & Angle
Torque & Angle
with Final Torque
Torque Audit

Colour Display.

Display and on board storage of final Torque (& Angle) values.

3000 (time and date stamped) reading memory.

USB & Bluetooth ®

Complimentary PC software "EvoLog".

Display can be powered from USB for interface to EvoLog. No separate tool mains power required.

Ability to download up to 12 User ID's to the tool.

20 unique Standalone Targets +20 unique Work Group Targets for each Work Group.

12 Standalone Work ID's +12 Work ID's in each Work Group.

Ability to have up to 5 Work Groups with a maximum of 144 steps, distributed over a maximum of 12 Work
IDs on the tool.

Ability to set Final Torque Target for a Snug Torque followed by Angle Target.

Snug Torque followed by Angle can be set as a fast 2 Stage Target.

ASCII interface to allow integration into third part control systems (like ProTight).

Graphing feature for the display of fastener profiles via Evolog.

Usage counter for monitoring of specific jobs.

Ability to set direction of operation of the tool Target.

Ability to set Turn Angle for a Torque only joint.
8
FIGURE 1 – Tool Features
Description
Fast tightening of fastener to torque value.
Tightening to snug torque followed by angle specification for fastener.
Tightening to snug torque followed by angle with final torque monitoring
specification for fastener.
For checking pre-tightened fasteners.
data transfer.
Drive square
Reaction bar
Ergonomic
trigger control
Bluetooth
housing
PASS / FAIL
lights
ON/OFF
switch
Cooling
fan
® Smart
User
interface
Mains lead