Features And Functions - norbar NORTRONIC 43501 Operator's Manual

FEATURES AND FUNCTIONS


TDS (Torque Data System) software included for complete data management and archiving to a PC.
Includes seamless data synchronisation. See TDS Manual part number 34397 for more information.
®

All NorTronic tools are Torque Handles with a 16mm spigot to interface to additional end fittings and
offsets. A push through ratchet head end fitting is supplied as standard.

Ability to enter offset compensation for non standard end fitting.
®

NorTronic can be locked from adjustment "P type" for production environments (via TDS).

2 colour 0.95" OLED displays for visual indication of measurement against Target status.

Audible indication of Target status.

Vibration feedback when Target reached.

4 digit resolution for all NorTronic

Maximum of 3000 (date & time stamped) reading memory store.

5 user buttons.

Operational from three AA internal rechargeable / non rechargeable batteries.

Ability to link targets for applications that require tightening in a sequence via TDS.

USB port for interface to TDS.

Built in Wireless transceiver for Wireless interface to TDS.

12 Torque units.

Time & date stamped Test Results.

Displays torque only or torque & angle.

IP44 protection against dust and water ingress.

Ability to Ratchet when measuring Angle.

3 Target modes - Torque Target only, Snug Torque followed by Angle Target or Snug Torque followed
by Angle Target + final Torque Target.
4
®
electronic torque wrenches.