Safety - General Power Tool Safety Warnings; Work Area Safety; Electrical Safety; Personal Safety - norbar ET2-72-1000-110 Operator's Manual

SAFETY – GENERAL POWER TOOL SAFETY WARNINGS
Symbol
WARNING:
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery operated
(cordless) power tool.

Work Area Safety


Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.

Electrical Safety

 Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
 Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
 Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
 Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk
of electric shock.
 When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
 If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected power supply. Use of an RCD reduces the risk of electric shock.

Personal Safety

 Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious personal injury.
Meaning
The lightening flash is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation mark is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the manual.
READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. FAILURE TO
FOLLOW THE WARNINGS AND INSTRUCTIONS MAY RESULT IN ELECTRIC
SHOCK, FIRE AND/OR SERIOUS INJURY.
3