View Results - norbar ET2-72-1000-110 Operator's Manual

View Results (example screens)
Press to exit the Run screen and show the Menu screen.
Select and press
Press to View Results.
Erase all will delete all of the results stored on the tool.
This example screen shows a Work Group called 'Carrier Hub
1' that was in use for the following saved results. All results are
time and date stamped.
Press or to scroll through saved readings.
This example screen shows a Work ID called 'Pretensioning'
that was in use for the following saved results.
20
to view results.
FIGURE 35 – Select View Results
FIGURE 36 – Select View Results /
Erase All
FIGURE 37 – View Work Group
FIGURE 38 – View Work ID