Gryphon™ 2D System And Network Layouts; Stand Alone Layouts - Datalogic Gryphon Series Product Reference Manual
General purpose handheld area imager bar code reader
Hide thumbs
Also See for Gryphon Series:
- Quick reference manual (33 pages) ,
- Reference manual (20 pages)
Table of Contents
Advertisement
Gryphon™ 2D System and Network Layouts
Linking to a PC in Client Mode (BT Master Mode)
The reader can optionally be linked in client mode to a Bluetooth-enabled PC with the serial
port profile. To do this, follow these steps:
1. Ensure the PC or terminal can network with Bluetooth devices and that it is powered on.
2. Ensure that a COM port is assigned under Services within the Bluetooth setup menu.
3. Create a Link label that contains the address of the PC Bluetooth adapter.
4. Scan the link label you created in step 3.
Power Off
Shuts off power to the BT handheld until next trigger
model.
Gryphon™ 2D System and Network Layouts
Stand Alone Layouts
Figure
Product Reference Guide
The Bluetooth address can be found under "Properties" within in the
Bluetooth setup menu.
NOTE
The link label is a Code 128 function 3 label with the following format:
<FN3 char>LnkB<12 character Bluetooth address>
12. Single Reader Layout
pull. This function only applies to the BT
Setup
27
Advertisement
Table of Contents
